| |
 You must have Adobe Acrobat Reader to view reference material. If you do not have Adobe Acrobat Reader click on the button to download the latest version.
This page has pop-up material. Please temporarily disable your pop-up blocker.
| |
Reference Material Names and Description |
 |
Positive Guidance for Older Motorists
By: George Crommes, PE
Example: "The root cause of these errors is multifaceted. As we age, we have reduced perception and reaction
times, our eyesight is poorer regardless of corrective lenses, and performance as drivers may be less than when we were young. All drivers, including the elderly, could benefit from awareness..."
 |
| |
|
 |
A Cost Effectiveness Analysis of Using Alternate Materials for Non-Skid in Shipboard Applications
By: Kurt P. Boenisch, Hector A. Cervantes, Andrew J. Clark IV, Jesse G. Espe and Erik B. Lohrke.
Example: "This MBA project investigated and evaluated the cost effectiveness of using alternative materials in shipboard construction, specifically in the area of non-skid application on surface ships. This project identified the costs and benefits of different alternatives..."
|
| |
|
 |
Sample of the Metallizing studies which have been conducted.
Listing of Authors and Titles of different types of papers along with a description of what the paper is about.
Example: "This paper discusses the benefits of thermal spray coatings, as well as quality control parameters, surface preparation, and application technique. The authorconcluded that while TSMCs have relatively high initial applied costs, they can provide economical long-term protectionbecause of their..."
|
| |
|
 |
Metal Alloys: Corrosion Protection for the Future
By: A.J. Siegmund, ICO Inc.
Example: "The use of metal alloys and their corrosion protective properties are well documented in oil field environments. There are many parts that can received a "coating" of an alloy that will allow them to give the same performance as the alloy itself. Improvements in application technology have broadened the range of ..."
|
| |
|
 |
Metalizing for Corrosion Prevention on Concrete and Steel Bridges
By: S. D. Cramer, B. S. Covino, Jr., S. J. Bullard, G. R. Holcomb, J. H. Russell and M. Siomek-Moroz
Example: "Life-cycle cost, durability, and low environmental impact make metalized coatings an attractive option for protection reinforced concrete bridges and steel bridges from corrosion damage, particularly in high-chloride environments such as coast or marine locations or where deicing salts are used. On reinforced..."
|
| |
|
 |
Use of Thermally Sprayed Aluminum in the Norwegian
Offshore Industry
By: Olaf Doble and Graham Pryde, Kvaerner Oil & Gas A/S, Stavanger, Norway
Example: "Thermal spraying with aluminum is not a new method for corrosion protection. For many years, thermally sprayed metal coatings have been widely accepted for giving very long protection lifetimes. Experience in Norway (on bridges, for example) and..."
|
| |
|
 |
Performance History of Thermal-Sprayed Aluminum Coatings in Offshore Service
By: Karl P. Fischer, William H. Thomason, Trevor Rosbrook and Jay Murali
Example: "In 1984, the Hutton TLP was installed with a sealed thermal-sprayed aluminum (TSA) coating. After eight years of service, the TSA coating on the production risers and tethers was still in good condition. The condition in the splash,..."
|
|
|
